排序方式: 共有50条查询结果,搜索用时 641 毫秒
41.
Effect of strain rate on strength properties of low-calcium fly-ash-based geopolymer mortar under dry condition 总被引:1,自引:0,他引:1
Manoj Khandelwal P. G. Ranjith Zhu Pan J. G. Sanjayan 《Arabian Journal of Geosciences》2013,6(7):2383-2389
This paper presents the mechanical and elastic properties of inorganic polymer mortar under varying strain rates. The study includes a determination of the compressive strength, modulus of elasticity and Poisson’s ratio at 0.001, 0.005, 0.01 and 0.05 mm/s strain rate. A total of 21 cylindrical specimens having 100 mm length and 50 mm diameter were investigated, and all tests were carried out pursuant to the relevant Australian Standards. Although some variability between the mixes was observed, the results show that, in most cases, the engineering properties of geopolymer mortar compare favourably to those predicted by the relevant Australian Standards for concrete mixtures. It was found that the change in the strain rate causes different behaviour related to the percentage of the ultimate load. The ultimate strength, Young’s modulus and Poisson’s ratio of the geopolymer mortar depend on the strain rate. It was also found that as the strain rate increases, mechanical and elastic properties of geopolymer mortar substantially increase in logarithmic manner. 相似文献
42.
Richa Shukla P. G. Ranjith S. K. Choi A. Haque Mohan Yellishetty Li Hong 《Rock Mechanics and Rock Engineering》2013,46(1):83-93
Acoustic emissions (AE) and stress–strain curve analysis are well accepted ways of analysing crack propagation and monitoring the various failure stages (such as crack closure, crack initiation level during rock failure under compression) of rocks and rock-like materials. This paper presents details and results of experimental investigations conducted for characterizing the brittle failure processes induced in a rock due to monocyclic uniaxial compression on loading of two types of sandstone core samples saturated in NaCl brines of varying concentration (0, 2, 5, 10 and 15 % NaCl by weight). The two types of sandstone samples were saturated under vacuum for more than 45 days with the respective pore fluid to allow them to interact with the rocks. It was observed that the uniaxial compressive strength and stress–strain behaviour of the rock specimens changed with increasing NaCl concentration in the saturating fluid. The acoustic emission patterns also varied considerably for increasing ionic strength of the saturating brines. These observations can be attributed to the deposition of NaCl crystals in the rock’s pore spaces as well some minor geo-chemical interactions between the rock minerals and the brine. The AE pattern variations could also be partly related to the higher conductivity of the ionic strength of the high-NaCl concentration brine as it is able to transfer more acoustic energy from the cracks to the AE sensors. 相似文献
43.
44.
45.
Bandara K. M. A. S. Ranjith P. G. Zheng W. Tannant D. D. De Silva V. R. S. Rathnaweera T. D. 《Acta Geotechnica》2022,17(11):4837-4864
Acta Geotechnica - Proppant crushing and embedment in hydraulically-induced fractures is a major drawback to the recovery of unconventional oil/gas and geothermal energy production. This study... 相似文献
46.
47.
The ultra-low permeability of shale reservoirs necessitates engineering applications such as hydraulic fracturing to enable the extraction of economically viable amounts of gas. In this process, a high-pressure fluid is injected into the reservoir to create a network of fractures. Proppants are solid, spherical, high-strength particles with size range between 8 and 140 mesh (105 μm–2.38 mm), which are injected into the reservoir simultaneously with fracturing fluid to prompt the opening of the fractures created, and they play a major role in the hydraulic fracturing process. As a result, appropriate management of proppants in shale reservoirs based on precise identification of their behaviour in shale reservoirs is necessary, because unexpected proppant performance or behaviour, commonly known as proppant damage mechanisms, can greatly reduce fracture conductivity. Therefore, it is essential to determine the major factors affecting proppant behaviour in order to maintain constant fracture conductivity. Numerous factors have been found in previous studies, and they can be summarized into three major groups: proppant properties, reservoir properties and hydraulic fracturing production, which affect proppant damage mechanisms. In the present paper, case studies have been provided on the determination of potential factors influencing proppant behaviour, followed by a discussion of their effects on fracture conductivity. The aim of this study is to present current opinions on potential factors influencing proppant behaviour based on a comprehensive literature review. 相似文献
48.
49.
S Schoombie RJM Crawford AB Makhado BM Dyer PG Ryan 《African Journal of Marine Science》2016,38(1):119-127
Sub-Antarctic Marion Island is one of the few islands where both species of Phoebetria albatrosses breed sympatrically. The last published assessment of their population trends, which reported counts up to 2008, concluded that the numbers of breeding pairs of sooty albatross P. fusca (Endangered) were decreasing, whereas numbers of light-mantled albatross P. palpebrata (Near Threatened) were increasing. Extending the counts to 2014 reversed these trends, with numbers of sooty albatrosses increasing from 2006 to 2014, and numbers of light-mantled albatrosses decreasing from 2007 to 2014. Confidence in island-wide counts is low due to the cryptic nature of the albatrosses on their largely inaccessible cliff-side nest sites, as well as counts for sooty albatrosses taking place late in the incubation period when 10?20% of nests have already failed. Given the greater conservation concern for the sooty albatross, we recommend that dedicated annual counts be conducted during the early incubation period, and be repeated shortly after the chicks hatch (late December), mid-way through the nestling period (late February) and prior to fledging (late April), to give a better idea of breeding success. Count zones also should be revised to facilitate more accurate counts, ensuring more reliable estimates of sooty albatross population trends at Marion Island. 相似文献
50.
Finite element simulation of fluid flow in fractured rock media 总被引:4,自引:3,他引:1
Fluid dynamics models are used by the petroleum industry to model single- and/or multi-phase flow within fractured rock formations,
in order to facilitate extraction of fluids such as oil and natural gas, and in other areas of engineering to study groundwater
flow, as well as to estimate contaminant seepage and transport. In this paper, the numerical modelling software Comsol is used to simulate air and water flow through a specimen of granite with a single vertical fracture subjected to triaxial
loading conditions. The intent of the model is to simulate triaxial test findings on a rock specimen with a natural fracture.
Fluid flow is simulated at various confining and inlet pressures using the cubic law. Model results were in good agreement
with laboratory findings. Pressure distribution along the fracture and across the specimen are as expected with a near linear
pressure distribution along the length of the fracture. A drawdown effect on pressure distribution across the specimen in
the vicinity of the fracture is also observed. Pressure gradient was largely uniform; however, some localised zones of high
gradient along the fracture are observed. 相似文献